[dead2sin]

[QUOTE][u]Quote by: ndpete[/u][p][QUOTE][u]Quote by: Brigandy[/u][p]
Like I said before, you have a different version of iLife 09 or you do not have iLife 09 even installed.[/p][/QUOTE]

Which iLife09 package are you running? I have the same issue. Here is sha1 of my package: sha1:d21feae38398b52b982a5586ba0b1168534343ce

Is it just this package that has issues? Why did it work and then just not work?

I’m waiting for a build to finish and give it another test.[/p][/QUOTE]

This is exactly the same sha1 hash that I have for my iLife 09 .mpkg.

Nate

[dead2sin]

iLife support 9.0.4 installs fine for me via InstaDMG. I have it as part of one of my catalogs and it doesn’t ask for 9.0.4 upon firstboot.

Nate

[dead2sin]

Here is a slightly updated version (0.3).

[url]http://dl.dropbox.com/u/11466/InstaDMG%20PatchOfficeUpdate%200.3.dmg[/url]

This was made using Platypus for the drop app part, so it should be nearly instant 🙂

Nate

[dead2sin]

Version 3 of this Patcher can be found here:

[url]http://dl.dropbox.com/u/11466/Patch%20Office%202011%20Installer/Version%203/PatchOffice2011Installer.dmg[/url]

This version should patch all localizations instead of just EN.

Nate

[dead2sin]

Yep, use this:

[url]https://www.afp548.com/forum/viewtopic.php?showtopic=28022
[/url]
Nate

[dead2sin]

Sounds good! Let me know how it turns out.

Nate

[dead2sin]

[QUOTE][u]Quote by: mgb123[/u][p]Tried marking the script as executable – no luck there. (Root/Wheel RWXR–R–)
[/p][/QUOTE]

So you’ve marked it as executable and when you type sudo ./firstboot.sh it won’t run? what does it say?

Nate

[dead2sin]

[QUOTE][u]Quote by: mgb123[/u][p]Nate – Got the note – just to be clear, though my permissions are correct, the script doesn’t run at all unless I run it manually after booting. All settings are Running the script manually is odd too – – the script won’t run with the plain ‘ole ./firstboot.sh – it requires that I specify sh./firstboot.sh – is that normal?

I’m going to make the change to the running of the script in the .plist and see if that will resolve the running- I’m curious as to why my script requires this but no one else seems to have encountered it.

I’ll make the adjustments to the reboot/kill sequence that you specify.

Thanks for your help on this![/p][/QUOTE]

Ahhh, yea. You shouldn’t have to do sh ./firstboot.sh. Try doing chmod +x on it to make it executable and see what happens. I wonder if that is why it is not running. Try the chmod +x then reboot the machine. If it runs and deletes itself, you know what the issue is.

Nate

[dead2sin]

I’m getting pretty sick of this spam detected feature. I can’t even respond to what you are saying without it saying its spam.

Open this: [url]http://pastebin.com/K4GGU1bc[/url]

Nate

[dead2sin]

On a image you created, don’t apply it to a machine, just double click to mount it and then browse to the User Template and make sure all the files are there. I would bet there is a small typo in the full path to the User Template or something of that sort (I’ve done it a few times myself).

Check out the new Office installer patcher, it fixes the Communicator issue I referenced in my post.

Nate

[dead2sin]

[QUOTE][u]Quote by: Allister[/u][p]It’s not the svn revision or insta-anything, it’s the package requirements looking at the wrong volume and/or doing the wrong thing.
To get around this, here’s the order that’s always worked for me(again, I only do iPhoto, but this should work with the entire package regardless):
iLife09
iLife Support 9.0.4
iPhoto 8.1.2
iLifeSlideshow_11

I can’t recall where I saw this in this forum, and I got that package from somewhere, maybe even in the iLife09.mpkg bundle itself, or a downloaded update.
Please let me know if it works for you,

Allister[/p][/QUOTE]

Would it be possible to update this on the SVN so its in the correct order?

I figure if there is a specific order that works, might as well get the SVN in line with that.

Nate

[dead2sin]

I’m honestly not sure what is going on there. I tested it like this:

I built a vanilla image using the one I posted to the mailing list without iLife Support 9.0.4 and ARD.

I then installed iLife 09 manually, didn’t prompt for 9.0.4 via software updates after that.

I installed iLife 2011 manually, it didn’t prompt for iLife support either after that.

Perhaps I will try a build using iLife09.catalog + the vanilla catalog and see what happens. Something wonky is going on for sure.

Nate

[dead2sin]

I updated this patcher to fix the communicator issue and the font issue (duplicated fonts).

Here is vesion 2:

[url]http://dl.dropbox.com/u/11466/Patch%20Office%202011%20Installer/Version%202/PatchOffice2011Installer.dmg[/url]

If anyone experiences issues, feel free to let me know.

Nate

[dead2sin]

I like [url]http://pastebin.com/[/url]. You can set it to automatically expire after X amount of time.

Nate

[dead2sin]

I wanted to note that this screws up communicator. I just discovered it today and I am kicking myself for not realizing it sooner. So FYI, if you use communicator, do NOT use this method 👿

Nate

*edit* This was microsoft being stupid again with their postflight scripts. See my latest post on this thread – [url]https://www.afp548.com/forum/viewtopic.php?showtopic=27797[/url]

[Author]

Posts