Home Forums Archive VaporSec VaporSec with Symantec 200R Firewall/VPN

This topic contains 4 replies, has 1 voice, and was last updated by  afp548contributor 12 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #358888

    Anonymous

    Hi,

    We just recently had a Symantec 200R Firewalll box installed on our network. The Symantec folks recommend the VaporSec VPN client to establish VPN tunnel connections to their appliances

    Here is the link to their support doc on how to set up the VaporSec client to work with their appliance box:
    http://service1.symantec.com/SUPPORT/ent-gate.nsf/6c5cd071f100c71888256ccd0050d548/3bc9eaa31908580888256e3e004a1d6c?OpenDocument&src=bar_sch_nam

    We configured both the VPN settings on the box, and the client settings on VaporSec exactly as they recommended in thir support document, but have been unable to get a connection.

    Can anyone offer any help, please? We are rather frustrated at this point.

    Thanks in advance.

    Alex Canizales
    [email protected]

    #359839

    Anonymous

    We also used the same document and obtained Firmware 1.7R from Symantec which is supposed to work, but it is not. We are running Max OS X 10.3.6, we got nothing on the 200R log and the following on the system.log –

    Nov 5 20:50:36 localhost DirectoryService[202]: InitLDAPConnection or ldap_init failure: Logging Failed LDAP connection with incomplete data
    Nov 5 20:50:52 localhost racoon: ERROR: isakmp.c:2045:isakmp_chkph1there(): phase2 negotiation failed due to time up waiting for phase1. ESP 209.XXX.54.XXX->129.XXX.168.XXX

    Any suggestions?

    #359840

    Anonymous

    Sorry.. Posted an incomplete log previously-

    Nov 5 20:48:25 localhost sudo: administ : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/sbin/racoon -f /Library/Application Support/VaporSec/racoon.conf
    Nov 5 20:50:36 localhost DirectoryService[202]: InitLDAPConnection or ldap_init failure: Logging Failed LDAP connection with incomplete data
    Nov 5 20:50:52 localhost racoon: ERROR: isakmp.c:2045:isakmp_chkph1there(): phase2 negotiation failed due to time up waiting for phase1. ESP 209.202.54.231->129.37.168.33
    Nov 5 20:52:21 localhost racoon: ERROR: isakmp.c:1706:isakmp_ph1resend(): phase1 negotiation failed due to time up. 0c08b233ae158396:0000000000000000

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Comments are closed