VaporSec -> Freeswan how-to

[rferia]

Hello Folks,

Just did a search of the eBBS and came up with some messages but nothing short of having a how-to for this particular setup.

Anyway, I am using Mac OS X 1.2.8 on a pbook and trying to connect to a freeswan remote server using X509 certificates. I tried using PSK – did not work but it worked with VPN Tracker demo. I checked the docs of Freeswan and there are some entries in the config that are required but are overwritten by VaporSec at vaporize.

HELP. I want to set it up using X509 certificates or PSK.

Thanks.

[rferia]

Thanks for the quick reply. Check these out…

http://web.morgul.net/~frodo/docs/kame+freeswan_interop.html
http://www.sandelman.ottawa.on.ca/linux-ipsec/html/2000/09/msg00511.html

Might help in adjusting the VaporSec code. Please let me know when you have it available for download. 🙂

Let’s take it one step at a time – set up PSK first and then X509 certificates so that RoadWarrior can be set.

Thanks.

[rferia]

Vaporsec changes the racoon.conf on Vaporize – I tried adding one line to the config but it was overwritten. I think this is the one that is needed to make it work on PSK. Hope you can make adjustments based on the links that I have sent you. 🙂

Cannot wait for the next version.

More power!

[Author]

Posts