saslauthd not starting during startup.

[Peggaweng]

Hi all,

Just wondering if someone can offer some help here?

I have upgraded a 10.3.9 server to 10.4.3 now that thew filters work and the problem is that saslauthd is not starting on reboot. It will start with the command /usr/local/saslauthd -a PAM so all is there and when this is run it works ok. I have looked at the watcdog.conf file and it has the line

saslauthd:respawn:/usr/local/saslauthd -a PAM # saslauthd for use with sieve

in it.

Please help me.

Thanks in advance Gary.

[Peggaweng]

I understand this but if I don’t start saslautd by hand the filters don’t work. I get an error about logging onto the timsieved. I have ensured that the line for it is in /etc/services : sieve 2000/tcp # Sieve mail filtering.

perf-port 1995/tcp # cisco perf port
tr-rsrb-port 1996/udp # cisco Remote SRB port
tr-rsrb-port 1996/tcp # cisco Remote SRB port
gdp-port 1997/udp # cisco Gateway Discovery Protocol
gdp-port 1997/tcp # cisco Gateway Discovery Protocol
x25-svc-port 1998/udp # cisco X.25 service (XOT)
x25-svc-port 1998/tcp # cisco X.25 service (XOT)
tcp-id-port 1999/udp # cisco identification port
tcp-id-port 1999/tcp # cisco identification port
#
callbook 2000/udp # callbook
callbook 2000/tcp # callbook
sieve 2000/tcp # Sieve mail filtering
# Devon Bowen
wizard 2001/udp # curry
dc 2001/tcp #
globe 2002/udp #
globe 2002/tcp #
emce 2004/udp # CCWS mm conf

? Confused.

[Author]

Posts