Network Change

[Anonymous]

Hi all. This is my first post, so forgive me if I screw it up.

I have VaporSec set up and working great. Problem is when I leave
my LAN at the home office (192.168.2.0/24) and go to my office environment
which is network 192.168.1.0/24. The remote IPSec device is a Watchguard
V10 and is set to only allow the 192.168.2.0/24 remote network access as the local network on the other side of the watchgaurd is 192.168.1.0/24. I don’t want to make any changes to the Watchguard ned.

Make sense? ( Hope so.. ) I was thinking that using the Local IP in Vapor Sec
would be the way to do this but no go. Am I doing something wrong? missing
something? or just way out in left field?

Any help would be greatly appreciated…

B.

[binsv]

Thanks.

Yes, it is a setting on the watchgaurd. It is set so that the network
connecting must be 192.168.2.0/24.

I was trying to get away with not changing any settings on the Watchgaurd, but oh well. I will re-number and tell the Watchgaurd to allow for it.

Thanks for your help.

Billy.

[Author]

Posts