Home › Forums › OS X Server and Client Discussion › Questions and Answers › LOM on Aggregated Ports?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 10, 2007 at 10:17 pm #367971
    Flash
    Participant

    Trying to get LOM (for simple purpose of Server Monitor) working on my new Intel xserves. I think the problem is that en0 and en1 are aggregated using LACP to a Cisco 3750. LOM and LACP aren’t playing nicely. Pinging the LOM IP fails and I get no response from the server remotely when using Server Monitor. I can, however, get Server Monitor to work perfectly by running it on the server, pointed to 127.0.0.1.

    Is it possible to use LOM on aggregated ports?

    February 19, 2007 at 12:20 am #368341
    Dave Hagan
    Participant

    I have not been successful in getting Link Aggregation in general (using LACP) to work on Cisco gear, specifically in my case, the 3560G switch. Weird things would happen when trying to see the Xserve G5 from Remote Desktop and Server Admin, I just ditched the whole effort. So I bet it has to do with the Cisco more than anything else.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed

Copyright © 2025 AFP548. All Rights Reserved.