- This topic has 0 replies, 1 voice, and was last updated 20 years, 2 months ago by
.
-
Posts
-
Thought I’d check here for a possible solution to a problem I’m having.
I had to replace our router, so I thought, why not just use one of the existing 10.4 servers to dish out DHCP. The one I chose was the one that was serving up QTSS/iChat.
I followed to “Gateway” assistant to setup the DHCP. All seemed to go well. Clients on the LAN got their DHCP addresses, connected to iChat service and all was happy… so I thought.
Turns out, QTSS no longer can be seen (from LAN and WAN). Also, clients outside of the LAN can not use iChat/Jabberd service.
By turning on the DHCP/NAT/DNS service via gateway assistant, I seem to have rendered all other services almost useless (I say almost because the LAN users still can use iChat service… but that’s all). Is there a way to have all these services run together and if so, how? Any help appreciated! Thanks in advance!
- You must be logged in to reply to this topic.