connect to transport smtp-amavis:

[donovan]

greetings,
my mail server has become very unstable. This is one of the errors I am seeing.

I tried to setup amavis and clamav, i have removed all entry’s from the master.cf and main.cf in /etc/postfix.

the but the errors still continue. How do i clean this bugger out?

postfix/qmgr[371]: warning: connect to transport smtp-amavis: No such file or directory

Other errors noticed:
Dec 23 07:50:37 localhost lmtpd[587]: DBERROR db4: 58 lockers
Dec 23 07:50:37 localhost lmtpd[610]: DBERROR db4: 59 lockers
Dec 23 07:50:37 localhost lmtpd[1135]: DBERROR db4: 60 lockers
Dec 23 07:50:37 localhost lmtpd[625]: DBERROR db4: 60 lockers
Dec 23 07:50:37 localhost lmtpd[589]: DBERROR db4: 60 lockers
Dec 23 07:50:37 localhost lmtpd[1139]: DBERROR db4: 60 lockers
Dec 23 07:50:37 localhost lmtpd[1223]: DBERROR db4: 58 lockers

Dec 23 00:43:09 mail2 postfix/qmgr[939]: warning: connect to transport smtp-amavis: No such file or directory
Dec 23 00:44:08 mail2 postfix/qmgr[939]: fatal: timeout connecting to transport: smtp
Dec 23 00:44:09 mail2 postfix/master[363]: warning: process /usr/libexec/postfix/qmgr pid 939 exit status 1
Dec 23 00:55:38 mail2 postfix/master[363]: warning: unix_trigger_event: read timeout for service public/flush

[donovan]

>the lmtpd errors should be cyrus issues. I’m assuming you’ve tried to rebuild >the database?

yes but im not sure if it has done any good

sudo -s -u cyrus
reconstruct -r

is there a better way of doing this?

as far as the postfix file. i have taken out all of the amavis entry’s from both master and main.

but no i have not tried using the default file with a reload.
I might have to do that when traffic dies out.

[hmag]

[quote:c1220892fd=”donovan”]>the lmtpd errors should be cyrus issues. I’m assuming you’ve tried to rebuild >the database?

yes but im not sure if it has done any good

sudo -s -u cyrus
reconstruct -r

is there a better way of doing this?

as far as the postfix file. i have taken out all of the amavis entry’s from both master and main.

but no i have not tried using the default file with a reload.
I might have to do that when traffic dies out.[/quote:c1220892fd]

Hi again,
I’ve finally muddled my way through the install process – restore your original config – do a postfix reload – then flush out the mail queue – the amavis errors are most likely mails which failed due to not being able to talk to amavis-new – that was the error in my case.

[donovan]

i just did that. had to re-do the system. i had other problems after the security update. I’m back to a stock 10.3 server

((crossing fingers))

[Author]

Posts