Home › Forums › Software › InstaDMG › 10.6.4 Update not being seen as needed on any of my instadmg images.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 14, 2010 at 6:12 pm #379094
    nessts
    Participant

    I have 2 machines that were installed from DVD they both saw the need for 10.6.4
    but the rest of the machines i have built via instadmg images do not see the need for 10.6.4.

    they are all at 10.6.3, instadmg was ran on a 10.6.3 workstation, all other updates have been seen and applied via software update. a proxy is not getting in the way,

    guessing that the pkg database is confused, but what do I look for?

    August 4, 2010 at 1:03 pm #379230
    dead2sin
    Participant

    If you built the image using InstaDMG, it should have applied all the latest updates on the image. The 10.6_vanilla.catalog gets updated as updates are released (normally in a timely manner).

    Nate

    August 4, 2010 at 2:43 pm #379232
    Allister Banks
    Participant

    Hey Nessts,

    I believe Nate’s referring to InstaUp2Date 10.6 vanilla catalog, which really is (at this point) a separate moving piece. While you may have used 10.6.3 media for the BaseOS image, InstaUp2Date would have pulled down many recent updates. Let us know which version of InstaDMG you’re using(and InstaUp2Date along with the catalog file being referenced if applicable.) Thanks,

    Allister

    August 4, 2010 at 4:53 pm #379233
    dead2sin
    Participant

    [QUOTE][u]Quote by: Allister[/u][p]Hey Nessts,

    I believe Nate’s referring to InstaUp2Date 10.6 vanilla catalog, which really is (at this point) a separate moving piece. While you may have used 10.6.3 media for the BaseOS image, InstaUp2Date would have pulled down many recent updates. Let us know which version of InstaDMG you’re using(and InstaUp2Date along with the catalog file being referenced if applicable.) Thanks,

    Allister[/p][/QUOTE]

    Ah, you are right 🙂 I’ve never used JUST InstaDMG, so I always assume everyone uses InstaUp2Date as well 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Comments are closed

Copyright © 2025 AFP548. All Rights Reserved.