Home › Forums › Software › InstaDMG › InstaDMG: Volume failed to eject error after rolling in FrontRowUpdate 2.1.2

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 3, 2008 at 4:30 pm #371753
    brlittle
    Participant

    Took me a few builds to narrow this down, but after adding FrontRowUpdate2.1.2.pkg to the build order, I get this during the build:
    [code]Volume failed to eject
    asr: successfully scanned image “/Volumes/Spare/InstaDMG_1.3b/Instadmg/ASR_Output/08-03-03.dmg”
    [/code]
    Even after InstaDMG completes, I still can’t eject OS-Build-08-03-03. It’s reported as in-use. Any suggestions about what might be causing this? Dumping the CLI doesn’t clear the problem. Is the build likely still usable?

    March 4, 2008 at 3:13 am #371760
    akinspe
    Participant

    There’s a known issue the iTunes launches iTunesHelper app after its install and that would prevent the volume from unmounting. I simply removed the postinstall scripts from the itunes.mpkg that does that.

    I don’t know of any issues with FrontRowUpdate though.

    March 4, 2008 at 2:23 pm #371763
    brlittle
    Participant

    Well guess what…apparently, I’m a boob.

    It is, in fact, iTunes that’s causing the problem. Please don’t ask me how I arrived at the conclusion that the FrontRow installer was to blame. I’m going with the story that it was first thing in the morning, and I hadn’t had my coffee yet. And that’s the best you’ll get out of me. 🙂

    Thanks for the tip on iTunes…sorry about my less-than-impressive testing skillz. 😳

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed

Copyright © 2025 AFP548. All Rights Reserved.