Home › Forums › OS X Server and Client Discussion › Mail › saslauthd not starting during startup.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 8, 2005 at 9:17 am #363999
    Peggaweng
    Participant

    Hi all,

    Just wondering if someone can offer some help here?

    I have upgraded a 10.3.9 server to 10.4.3 now that thew filters work and the problem is that saslauthd is not starting on reboot. It will start with the command /usr/local/saslauthd -a PAM so all is there and when this is run it works ok. I have looked at the watcdog.conf file and it has the line

    saslauthd:respawn:/usr/local/saslauthd -a PAM # saslauthd for use with sieve

    in it.

    Please help me.

    Thanks in advance Gary.

    November 9, 2005 at 8:11 am #364014
    Peggaweng
    Participant

    I understand this but if I don’t start saslautd by hand the filters don’t work. I get an error about logging onto the timsieved. I have ensured that the line for it is in /etc/services : sieve 2000/tcp # Sieve mail filtering.

    perf-port 1995/tcp # cisco perf port
    tr-rsrb-port 1996/udp # cisco Remote SRB port
    tr-rsrb-port 1996/tcp # cisco Remote SRB port
    gdp-port 1997/udp # cisco Gateway Discovery Protocol
    gdp-port 1997/tcp # cisco Gateway Discovery Protocol
    x25-svc-port 1998/udp # cisco X.25 service (XOT)
    x25-svc-port 1998/tcp # cisco X.25 service (XOT)
    tcp-id-port 1999/udp # cisco identification port
    tcp-id-port 1999/tcp # cisco identification port
    #
    callbook 2000/udp # callbook
    callbook 2000/tcp # callbook
    sieve 2000/tcp # Sieve mail filtering
    # Devon Bowen
    wizard 2001/udp # curry
    dc 2001/tcp #
    globe 2002/udp #
    globe 2002/tcp #
    emce 2004/udp # CCWS mm conf

    ? Confused.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed

Copyright © 2025 AFP548. All Rights Reserved.