Sonicwall SOHO3 & OS X 10.3.3 help, please.

[rnoranbrock]

Hi,
I’m trying to use VaporSec to connect to a Sonicwall SOHO3. I believe I have all the parameters from the SOHO entered into VaporSec correctly, but when I “Vaporize” I get the following message as part of the log output:

May 11 20:26:33 localhost racoon: ERROR: isakmp.c:1520:isakmp_setup_socket(): failed to bind (Address already in use).

What does this mean and how do I fix it?

System info:
PowerBook G3 running OS X v.10.3.3 with latest updates.
Connecting via Airport (Graphite) base station w/ no DHCP on.
ABS connected via ethernet to MacSense MIH X-120 router w/ DHCP on.
Router connected via Verizon DSL.

Any assistance would be appreciated. What other information would be helpful in attempting to debug this connection?

Thanks very much,
Randy

[rnoranbrock]

Tried both, but no success. I get the same message trying VaporSec after a reboot as I did before.

Thanks for the suggestion. Any others?

-Randy

[Anonymous]

Are you running any other VPN software which might bind to the port at startup? Perhaps Nortel or Cisco? If so, it may need to be disabled. Generally there is a script to start/stop the service.

[rnoranbrock]

No, no other VPN software in use. I had tried following the Flying Racoons article to set it up, but it wasn’t working, so I passed and installed VaporSec to try. I have rebooted, but as I said above, that didn’t work. What port is trying to be used? Is there any way to determine what else might be using it?

Thanks,
-R

[Author]

Posts