Home › Forums › OS X Server and Client Discussion › Questions and Answers › no default route with dhcp reservations

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 8, 2003 at 3:15 am #355467
    soellman
    Participant

    I’m running the dhcp server on osx server 10.2.4, and have configured it to serve out static reservations (with the host entries in netinfo). Unfortunately, when serving out those reserved addresses, it neglects to give a default route to those clients. The clients without reservations receive the default route just fine. Has anyone else seen this behavior?

    It shouldn’t matter, but this machine is also running as a nat router (thanks mactroll for the tuts!), and has two ethernet cards- one builtin, and one dec tulip chipset card (generic kingston iirc).

    Also, is there any way to add arbitrary key/value pairs to be handed out to clients? curious..

    cheers,
    -o

    June 23, 2003 at 9:19 pm #355950
    Anonymous
    Participant

    i am deploying a slew of osx x serves and would like to know exactly how one goes about setting up DHCP reservations for static assignment. i would like to make sure that my printers are getting the same dhcp address each time they boot up so that i can manage the addresses from net info. how do i set this up. this will make migration to another subnet much easier in the future if everything is controlled by dhcp. thanks.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed

Copyright © 2025 AFP548. All Rights Reserved.