Home › Forums › OS X Server and Client Discussion › Questions and Answers › Windows DHCP and NetBoot on 10.2 server

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 22, 2002 at 3:04 am #354680
    ikellen
    Participant

    Currently we run both a windows and mac network, with a windows server as a DHCP server. We are trying to set up NetBoot on our mac network, but it doesnt work because it doesnt work with our Win2k DHCP server. Has anyone gotten netboot to work with a Windows DHCP server? We would like to get this working ASAP, as currently we run around to all our workstations with 10.2 CD’s 🙂

    October 23, 2002 at 3:20 am #354690
    ikellen
    Participant

    Not totally sure, but I’m pretty sure we run a Windows 2000 DHCP server inside of our routers. On another subject, is it possible to run thw Win2k DHCP AND a Mac OS 10.2 server that runs DHCP on the same subnet?

    July 31, 2003 at 12:50 am #356206
    legacyb4
    Participant

    As long as you have each DHCP server managing non-overlapping ranges of addresses in the same subnet, you should be fine. I have a Win2k-based DHCP server managing 1/4 of the DHCP range on standby just in case something goes wrong with the main server.

    Cheers.

    [quote:b7227b1952=”ikellen”]Not totally sure, but I’m pretty sure we run a Windows 2000 DHCP server inside of our routers. On another subject, is it possible to run thw Win2k DHCP AND a Mac OS 10.2 server that runs DHCP on the same subnet?[/quote:b7227b1952]

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed

Copyright © 2025 AFP548. All Rights Reserved.