I had been reading the articles on mTunnel and VPN on the old version of the site, but now when I search on the site I cannot find them, unless I google.
Anyway, I cannot now find a post I had read about a terminal mod using the Tiger VPN server behind an existing hardware router/firewall. Hints pls.
The basic setup is as follows;
G4 Sawtooth;
Built-in Ethernet,
additional Dlink DFE-530TX Ethernet card,
Mac OS X 10.4.2 Server,
Netgear WGR614v5,
Alcatel Speed Touch DSL.
The Netgear is connected to a SpeedTouch DSL modem, the router is running the DHCP, NAT, etc. it is serving both wireless and cat5 to a small network of imacs and powerbooks.
(If the macs are connected to the DSL modem directly, restarts seem to make the modem go flakey/hang, however the Netgear runs happily away, and has been preventing any loss of service/reset of the modem).
I'd like to set the Server up to offer VPN services, keeping it behind the Netgear (i.e. without placing it between the netgear and the DSL modem.)
Gateway Setup Assistant wants the Server to sit up front, but I'd really prefer not to set it up that way.
Is this possible? Any replies gratefully appreciated.