VaporSec and Linksys BEFVP41

Hello I had VaporSec working with a Linksys BEFVP41 on a Local subnet. So now I've moved it to a remote network. When I fired up VaporSec nothing happens. All I get is this. Jan 27 16:05:45 epimetheus racoon: INFO: main.c:170:main(): @(#)This product linked OpenSSL 0.9.6e 30 Jul 2002 (http://www.openssl.org/) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): fe80::230:65ff:fe04:7d61[500] used as isakmp port (fd=6) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): 3ffe:2900:2006:40:203:93ff:feb2:b0ee[500] used as isakmp port (fd=7) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): 66.218.0.59[500] used as isakmp port (fd=8) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): fe80::203:93ff:feb2:b0ee[500] used as isakmp port (fd=9) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): 127.0.0.1[500] used as isakmp port (fd=10) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): fe80::1[500] used as isakmp port (fd=11) Jan 27 16:05:45 epimetheus racoon: INFO: isakmp.c:1357:isakmp_open(): ::1[500] used as isakmp port (fd=12) I'm thinking that when I try to connect to the remote end a connection will get made. But it never does. I don't see anything using a tcpdump to check for traffic either. sincerely Ken